How About The Hydraulic Brake Master Cylinder

- Apr 18, 2017 -

1. Remove the brake fluid from the brake master cylinder tank, unscrew the brake wheel cylinder bleed screw, step on the brake pedal several times, and remove the brake fluid from the brake master cylinder.

2. Remove the brake cylinder from the tubing joint, remove the tank.

3. Loosen the connecting bolts of the brake master cylinder and the vacuum booster to the lower brake cylinder.

4. Install the brake master cylinder in the reverse order of disassembly, and tighten the tightening force of 20 Nm for the connecting nut of the brake master cylinder and the vacuum booster.

5. After the brake master cylinder is installed, remove the air from the brake fluid removal system.


Related News

Related Products

  • LHAD06-AG01B Mechanical Agricultural Brake Axle
  • Single Room T09 Air Brake Chamber T12 Air Brake Chamber
  • 30T Gearbox Inside Trailer Parts Landing Gear
  • Spring Brake Chamber T16 Air Brake Chamber T12 Air Brake Chamber
  • 2000lbs Top Wind Trailer Jacks Weld on Mount Trailer Jacks
  • 2000 Lb Light Duty Side Wind A Frame Trailer Jacks Zinc-Plated