Galvanized Double Eye Trailer Leaf Spring

Galvanized Double Eye Trailer Leaf Spring

Galvanized Double Eye Trailer Leaf Spring 1.Product Introduction of the Double Eye Leaf Spring The Galvanized Double Eye Leaf Spring used for light duty trailer, boat trailer, atv trailer and caravan.Leaf springs provides for a smooth and level ride by absorbing bumps and uneven road surfaces....

Product Details

Galvanized Double Eye Trailer Leaf Spring


1.Product Introduction of the Double Eye Leaf Spring

The Galvanized Double Eye Leaf Spring used for light duty trailer, boat trailer, atv trailer and caravan.Leaf springs provides for a smooth and level ride by absorbing bumps and uneven road surfaces. Constructed with Heavy Duty Steel for years of trouble free service.  Can easily be used in single, tandem or triple axle trailer configuratuons.


2.Product Description of the Double Eye Leaf Spring

Lahoo Auto Parts produce Small Leaf Spring including Double eye leaf spring, open eye(hook) leaf spring, Slipper leaf spring, and other related parts such as Hanger, Equalizer, Spring Seat, Bolts and Pins.

Welcome processing with supplied samples or drawings.  Or just give us the OEM number, we will work it out.

UNA, PR etc American leaf spring, material 60Si2Mn,used in Boat Trailer, Cargo Trailer, Farming Trailer and so on.


3.Product Feature and Details of the Double Eye Leaf Spring

>Main Leaf Spring Length:

While going along the leaf surface, measure from the center of the eye (A) to the center pin (C). Repeat this on the other side. Center of the eye (B) to the center pin (C).  

6.jpg

>Width of the Spring:

Next, measure the width of the leaf spring (A to B). This is done simply by measuring along the center of the top leaf. It is common for a spring widths to be a 2 1/2” or 3”. Older trucks can get 2 1/4”.

>Amount of Leaves in the Spring:

Count the amount of leafs that are in the spring. Count from top to bottom, including the rebound leaf which is located at the bottom. The diagram below shows 3 leaves (colored green) and 1 Rebound leaf (colored red). This would be a 3/1 Leaf Pack.

7.jpg

The Rebound leaf is a short, thicker, flat leaf that gives the rest of the upper leafs to rebound off of. When measuring the length of the leaf spring, it is very important to go along the leaf surface. If you stretch a little or out you will get a different measurement.

Welcome to buy the galvanized double eye trailer leaf spring with our professional manufacturers and suppliers. The customized trailer solution is also available in our factory in accordance to your requirement.

Related Products

Inquiry